Description

Hard Antifouling

Suitable for Aluminium Hulls, Propellers and Boot Tops

A hard antifouling suitable for professional and consumer application onto vessels in fresh, brackish and salt water.
The hard scrubbable coating is suitable for burnishing to provide a smoother finish. Providing protection for up to one year, Hard Antifouling is ideal for fast powerboats propellers, outdrives, sterngear and the waterline.
In a range of bright colours suitable for all substrates including aluminium.

Product Features and Benefits

• Formulated for use on aluminium
• Single season protection from fouling organisms; slime, aquatic plants and animals.
• Available in bright colours
• Offers an alternative solution to Trilux 33 for DIY Boat Owners

Special Features

• To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide
• Product and ambient temperature should be minimum 5°C and maximum 35°C.
• Substrate temperature should be minimum 3°C above dew point and maximum 35°C.
• Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc-sprayed surfaces.
• Can be applied direct over most types of antifoulings, provided they are in sound condition, with the exception of PTFE antifoulings.

Product Data

Colour and code White (YBP230), Black (YBP234), Red (YBP231), Navy (YBP233)
Coverage (Practical) 3m²/L per coat by spray, (Practical) 9.00 m²/lt by brush/roller
Surfaces GRP, Wood, Steel/Iron, Lead, Bronze, Aluminum.
Dry times at 5ºC (41ºF) 15ºC (59ºF) 23ºC (73ºF) 35ºC (95ºF)
Immersion Time** 24 hours 12 hours 8 hours 6 hours
Touch Dry 1 hour 45 mins 30 mins 20 mins
Dry to overcoat 16 hours 12 hours 8 hours 6 hours
Application Airless Spray, Brush, Roller
Coats required One by spray, Two by brush/roller
Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges.
Available pack sizes 2.5lt, 375ml (not all colours are available in both pack sizes)

* Consult your International representative for paint specification
** Maximum Time to Immersion is six months

 

Hard Antifouling data sheet