Prop Protector Slide On Rope Cutters Imperial Sizes
£70.03 – £149.09 (ex. VAT)
Description
Prop Protector Slide On Rope Cutters Imperial Sizes
The Prop Protector rope and weed cutter is a simple shaft driven blade. Rotating with the shaft and instantly cutting any rope, weed or debris picked up or snagged by the propeller.
Manufactured from high grade (316) stainless steel, the Prop Protector rope and weed cutter is easy to install. Fully installed in minutes, with your boat out of the water or between tides.
The Prop Protector rope and weed cutter sits on the shaft, between the propeller hub and the stern bearing, waiting to cut anything that threatens to entangle it. There are no moving parts to fail. There is just a razor sharp marine grade stainless steel blade, ready to slice through most marine debris.
This clamp-on Prop Protector weed and rope cutter is supplied as an assembly that is split into two halves along the longitudinal axis so that it can be installed on the shaft without removing the propeller.
The rope cutter is clamped onto the shaft by two Allen screws. It is also fixed by a set screw that locates into a small drill dimple made in the shaft.
Prop Protector rope and weed cutters are NOT designed to be used with outboard engines, stern drive engines or Saildrives.
| Shaft Size | Blade Diameter | Width | Dimensions |
| 1″ | 3.15″ (80mm) | 0.47″ (12mm) | Minimum Gap: 0.7″ (18mm) |
| 1-1/4″ | 3.15″ (80mm) | 0.47″ (12mm) | Minimum Gap: 0.7″ (18mm) |
| 1-3/8″ | 3.94″ (100mm) | 0.47″ (12mm) | Minimum Gap: 0.7″ (18mm) |
| 1-1/2″ | 3.94″ (100mm) | 0.47″ (12mm) | Minimum Gap: 0.7″ (18mm) |
| 1-1/4″ | 3.94″ (100mm) | 0.47″ (12mm) | Minimum Gap: 0.7″ (18mm) |
| 1-3/4″ | 4.72″ (120mm) | 0.47″ (12mm) | Minimum Gap: 0.7″ (18mm) |
| 2″ | 4.72″ (120mm) | 0.47″ (12mm) | Minimum Gap: 0.7″ (18mm) |
Additional information
| Weight | 1089 g |
|---|---|
| Slide-On Imperial Sizes | 1" BORE SLIDE-ON PROP PROTECTOR 80mm Blade Diameter, 1 1/4" BORE SLIDE-ON PROP PROTECTOR 80mm Blade Diameter, 1 3/8" BORE SLIDE-ON PROP PROTECTOR 100mm Blade Diameter, 1 1/2" BORE SLIDE-ON PROP PROTECTOR 100mm Blade Diameter, 1 1/4" BORE SLIDE-ON PROP PROTECTOR 100mm Blade Diameter, 1 3/4" BORE SLIDE-ON PROP PROTECTOR 120mm Blade Diameter, 2" BORE SLIDE-ON PROP PROTECTOR 120mm Blade Diameter |